Methodology Measurement of Inclination Gears in Operation

DOI

10.2991/978-94-6463-182-1_37How to use a DOI?

Keywords

Inclination gears; transmission; needle bearings; gear modification; radial clearance

Abstract

This article deals with the design of methodology for determining the behaviour of a gear on a needle bearing. The knowledge of behaviour of the gear on a needle bearing is important for the gear modification. The modification of the gear that is mounted on a needle bearing cannot be calculated only from the shaft deformation. There is a radial clearance between the shaft, gear hub and needle bearings so the gear cannot copy the deflection curve of the shaft. Inclination of gears on needle bearings is measured on the apparatus of own design. The results of inclination measurement determine the correct size of modification of the gear that will generate the least noise and vibration in a given operating range. The experimental determination of the modifications is time consuming and expensive.

Copyright

© 2023 The Author(s)

Open Access

Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Download article (PDF)

TY  - CONF
AU  - Petr Cigán
AU  - Václav Mosler
AU  - Lukáš Klapetek
PY  - 2023
DA  - 2023/05/30
TI  - Methodology Measurement of Inclination Gears in Operation
BT  - Proceedings of the 61st International Conference of Machine Design Departments (ICMD 2020)
PB  - Atlantis Press
SP  - 356
EP  - 364
SN  - 2589-4943
UR  - https://doi.org/10.2991/978-94-6463-182-1_37
DO  - 10.2991/978-94-6463-182-1_37
ID  - Cigán2023
ER  -