Proceedings of the 61st International Conference of Machine Design Departments (ICMD 2020)

<Previous Article In Volume
Next Article In Volume>

Application of CAD Programs for a Gearing Geometric Model

Authors
Samuel Sivák1, *
1Department of Construction and Transport Engineering, Faculty of Mechanical Engineering, Technical University of Košice, Košice, Slovakia
*Corresponding author. Email: samuel.sivak@tuke.sk
Corresponding Author
Samuel Sivák
Available Online 30 May 2023.
DOI
10.2991/978-94-6463-182-1_11How to use a DOI?
Keywords
3D model; Gears; CAD
Abstract

CAD programs are used in engineering environment on a daily basis, because of their wide use in designing, machining or evaluating process. This fact boosted the development and impact range of CAD software possibilities, but in the field of gears, there may be some shortcomings. These shortcomings are presented in a lack of gear generating tools or addons, and also in a possibilities these tools and addons provide. For uncommon geometries of gears, user may need to use other methods. Some of them are explained in this article. The advantages of explained methods are that they can be used for almost any gear wheel, or the modification of existing gear is quicker.

Copyright
© 2023 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Download article (PDF)

<Previous Article In Volume
Next Article In Volume>
Volume Title
Proceedings of the 61st International Conference of Machine Design Departments (ICMD 2020)
Series
Atlantis Highlights in Engineering
Publication Date
30 May 2023
ISBN
978-94-6463-182-1
ISSN
2589-4943
DOI
10.2991/978-94-6463-182-1_11How to use a DOI?
Copyright
© 2023 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Cite this article

risenwbib
TY  - CONF
AU  - Samuel Sivák
PY  - 2023
DA  - 2023/05/30
TI  - Application of CAD Programs for a Gearing Geometric Model
BT  - Proceedings of the 61st International Conference of Machine Design Departments (ICMD 2020)
PB  - Atlantis Press
SP  - 81
EP  - 91
SN  - 2589-4943
UR  - https://doi.org/10.2991/978-94-6463-182-1_11
DO  - 10.2991/978-94-6463-182-1_11
ID  - Sivák2023
ER  -