Proceedings of the 61st International Conference of Machine Design Departments (ICMD 2020)

<Previous Article In Volume
Next Article In Volume>

Application of Finite Element Method and MSC Adams Software in Design Process of Truck Trailers

Authors
Andrzej Harlecki1, *, Adam Przemyk1
1Faculty of Mechanical Engineering and Computer Science, University of Bielsko-Biala, Willowa 2 Street, 43-309, Bielsko-Biala, Poland
*Corresponding author. Email: aharlecki@ath.bielsko.pl
Corresponding Author
Andrzej Harlecki
Available Online 30 May 2023.
DOI
10.2991/978-94-6463-182-1_21How to use a DOI?
Keywords
Truck Trailer; Dynamics; FEM; MSC Adams; NX Nastran/Femap; Craig-Bampton Method
Abstract

A method of a dynamic analysis of a special kind of trailers with the central axle (axles) towed by truck is presented in the paper. Within the method, vibration and also strength calculations of frames and other components of the selected trailer can be carried out. Interface of MSC Adams software, for the dynamic analysis of mechanical systems, and NX Nastran/Femap software, for the finite element method (FEM) analysis, was used. The information transfer between both types of the software was realised within this interface. In the approach proposed, a significant reduction of degrees of freedom of the FEM model of the trailer frame was performed based on the Craig-Bampton method. Some numerical results were verified experimentally by using a trailer towed by a truck driving on the test track. The main goal of the proposed method is to ensure the reliability of the designed trailers in traffic conditions.

Copyright
© 2023 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Download article (PDF)

<Previous Article In Volume
Next Article In Volume>
Volume Title
Proceedings of the 61st International Conference of Machine Design Departments (ICMD 2020)
Series
Atlantis Highlights in Engineering
Publication Date
30 May 2023
ISBN
978-94-6463-182-1
ISSN
2589-4943
DOI
10.2991/978-94-6463-182-1_21How to use a DOI?
Copyright
© 2023 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Cite this article

risenwbib
TY  - CONF
AU  - Andrzej Harlecki
AU  - Adam Przemyk
PY  - 2023
DA  - 2023/05/30
TI  - Application of Finite Element Method and MSC Adams Software in Design Process of Truck Trailers
BT  - Proceedings of the 61st International Conference of Machine Design Departments (ICMD 2020)
PB  - Atlantis Press
SP  - 191
EP  - 202
SN  - 2589-4943
UR  - https://doi.org/10.2991/978-94-6463-182-1_21
DO  - 10.2991/978-94-6463-182-1_21
ID  - Harlecki2023
ER  -