Proceedings of the 61st International Conference of Machine Design Departments (ICMD 2020)

<Previous Article In Volume
Next Article In Volume>

Adhesion Properties Evaluation of Heat Treated Steel 100Cr6 with Applied DLC Coating

Authors
Jozef Bronček1, *, Martin Vicen1, Peter Weis1, Viera Konstantová1, Jozef Jenis1
1University of Žilina, Univerzitná, 8215/1, 01026, Žilina, Slovakia
*Corresponding author. Email: jozef.broncek@fstroj.uniza.sk
Corresponding Author
Jozef Bronček
Available Online 30 May 2023.
DOI
10.2991/978-94-6463-182-1_19How to use a DOI?
Keywords
Heat Treated 100Cr6; Adhesion; DLC Coating; Nanoindentation; Scratch Test
Abstract

The article deals with determination of tribological and basic properties of heat-treated bearing steel 100Cr6. It is typical steel for production a small and medium size of rolling bearings. For reducing the friction coefficient of functional surfaces of heat-treated bearing steel 100Cr6, the application of DLC (Diamond Like Carbon) coating is used. The quality of the thin surface coating was evaluate in terms of adhesion-cohesive properties. The measurement of the mechanical properties nanohardness, modulus of elasticity was perform by the nanoindentation method. A scratch test was use for analysis of adhesion properties. All results of experimental measurements will suitable for design of carry materials and iron-based materials. The work was done by financial support of project No. KEGA 026ŽU-4/2019 Implementation of integrated GPS system for specification and products verification into the teaching process of engineering study programs and putting them into the technical practice at the University of Žilina, Department of Mechanical Design and Machine Elements.

Copyright
© 2023 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Download article (PDF)

<Previous Article In Volume
Next Article In Volume>
Volume Title
Proceedings of the 61st International Conference of Machine Design Departments (ICMD 2020)
Series
Atlantis Highlights in Engineering
Publication Date
30 May 2023
ISBN
978-94-6463-182-1
ISSN
2589-4943
DOI
10.2991/978-94-6463-182-1_19How to use a DOI?
Copyright
© 2023 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Cite this article

risenwbib
TY  - CONF
AU  - Jozef Bronček
AU  - Martin Vicen
AU  - Peter Weis
AU  - Viera Konstantová
AU  - Jozef Jenis
PY  - 2023
DA  - 2023/05/30
TI  - Adhesion Properties Evaluation of Heat Treated Steel 100Cr6 with Applied DLC Coating
BT  - Proceedings of the 61st International Conference of Machine Design Departments (ICMD 2020)
PB  - Atlantis Press
SP  - 171
EP  - 179
SN  - 2589-4943
UR  - https://doi.org/10.2991/978-94-6463-182-1_19
DO  - 10.2991/978-94-6463-182-1_19
ID  - Bronček2023
ER  -