Proceedings of the 61st International Conference of Machine Design Departments (ICMD 2020)

Plastic Waste Shredder

Authors
Jan Galík1, Robert Kohár1, *, Rudolf Madaj1, Peter Stevko1
1University of Žilina, Univerzitná 8215/1, 01026, Žilina, Slovakia
*Corresponding author. Email: robert.kohar@fstroj.uniza.sk
Corresponding Author
Robert Kohár
Available Online 30 May 2023.
DOI
10.2991/978-94-6463-182-1_5How to use a DOI?
Keywords
Plastic Waste; Shredder; Recycling; Construction Points Design
Abstract

Used plastics are all around us. Their production is excessive and presents a big problem today and an even bigger problem for the future. They are used very often for their positive qualities. Just as the pros also have their negatives. One of the biggest drawbacks is the decomposition time of this kind of a waste. Separation, collection, and recycling should be taken for granted, but they are not. Plastic waste management is a very inefficient process because plastics take up a lot of space at low weight. The use of crushers, the reduction of waste should play a major role; especially in reducing the logistical costs of plastic handling and preparation for further recycling steps. This article describes the possible design of a plastic waste shredder, with key parts and visualization of a machine. An important part is the solution of the crushing mechanism itself, which plays a key role in the operation of the equipment. This project was solved at the Department of Design and Machine Elements.

Copyright
© 2023 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Download article (PDF)

Volume Title
Proceedings of the 61st International Conference of Machine Design Departments (ICMD 2020)
Series
Atlantis Highlights in Engineering
Publication Date
30 May 2023
ISBN
978-94-6463-182-1
ISSN
2589-4943
DOI
10.2991/978-94-6463-182-1_5How to use a DOI?
Copyright
© 2023 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Cite this article

TY  - CONF
AU  - Jan Galík
AU  - Robert Kohár
AU  - Rudolf Madaj
AU  - Peter Stevko
PY  - 2023
DA  - 2023/05/30
TI  - Plastic Waste Shredder
BT  - Proceedings of the 61st International Conference of Machine Design Departments (ICMD 2020)
PB  - Atlantis Press
SP  - 33
EP  - 42
SN  - 2589-4943
UR  - https://doi.org/10.2991/978-94-6463-182-1_5
DO  - 10.2991/978-94-6463-182-1_5
ID  - Galík2023
ER  -