Proceedings of the 61st International Conference of Machine Design Departments (ICMD 2020)

The Effect of Helical Gears Parameters on Specific Sliding

Authors
Lukas Klapetek1, *, Jiri Dobias1, Petr Cigan1
1Department of Machine Parts and Mechanisms, Faculty of Mechanical Engineering, VSB-Technical University of Ostrava, 17. Listopadu 2172/15, 708 00, Ostrava-Poruba, Czech Republic
*Corresponding author. Email: lukas.klapetek@vsb.cz
Corresponding Author
Lukas Klapetek
Available Online 30 May 2023.
DOI
10.2991/978-94-6463-182-1_27How to use a DOI?
Keywords
Helical gear; Helix angle; Specific sliding; Pressure angle
Abstract

Specific sliding is an essential factor in terms of surface wear of involute gears (involute gear teeth). At the same time, their values affect the heat generation in gearing. Since the values of the specific sliding reach its maximum at the gear tips and roots, the wear of these parts is the most significant, especially in the pinion’s root. Thus, this specific place suffers pitting the most, as the values of specific sliding are the highest there. Therefore, it is beneficial for the designer to know how the geometrical and technological parameters can directly affect the value of specific sliding during the design of the gears. However, disadvantage is that the various parameters interact with each other, which can be difficult for the designer due to various design constraints. This article discusses the effect of changing geometrical parameters on the specific sliding magnitude. Furthermore, the interdependence of these parameters concerning each other is also discussed.

Copyright
© 2023 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Download article (PDF)

Volume Title
Proceedings of the 61st International Conference of Machine Design Departments (ICMD 2020)
Series
Atlantis Highlights in Engineering
Publication Date
30 May 2023
ISBN
978-94-6463-182-1
ISSN
2589-4943
DOI
10.2991/978-94-6463-182-1_27How to use a DOI?
Copyright
© 2023 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Cite this article

TY  - CONF
AU  - Lukas Klapetek
AU  - Jiri Dobias
AU  - Petr Cigan
PY  - 2023
DA  - 2023/05/30
TI  - The Effect of Helical Gears Parameters on Specific Sliding
BT  - Proceedings of the 61st International Conference of Machine Design Departments (ICMD 2020)
PB  - Atlantis Press
SP  - 259
EP  - 265
SN  - 2589-4943
UR  - https://doi.org/10.2991/978-94-6463-182-1_27
DO  - 10.2991/978-94-6463-182-1_27
ID  - Klapetek2023
ER  -