Proceedings of the 6th International Conference on Advanced High Strength Steel and Press Hardening (ICHSU 2022)

The Influence of Heating Rate on Phase Transformation of ZnFe Coating in Hot Stamping

Authors
K. Wang1, *, D. Y. Fang2, B. Zhu2, Y. L. Wang2, Y. S. Zhang2, Z. Z. Wang1, W. Z. Dong1, Q. Q. Lin1
1School of Mechanical Engineering and Mechanics, Xiangtan University, Xiangtan, 411105, China
2State Key Laboratory of Materials Processing and Die and Mould Technology, Huazhong University of Science and Technology, Wuhan, 430074, China
*Corresponding author. Email: wk@xtu.edu.cn
Corresponding Author
K. Wang
Available Online 2 March 2023.
DOI
10.2991/978-94-6463-114-2_30How to use a DOI?
Keywords
Hot stamping; ZnFe coating; Rapid heating; Phase transformation
Abstract

In this study, the ZnFe coated boron steel specimens were treated by rapid heating at different heating rates from 20 ℃/s to 100 ℃/s. The coating morphologies and phase compositions were characterized to investigate the influence of heating rate on phase transformation of ZnFe coating. The results indicated that there was no continuous α-Fe(Zn) layer formed at coating/substrate interface during the heating-up stage when the heating rate was higher than 50 ℃/s. As a result, the phase transformation of the coating was facilitated. At the heating rate of 100 ℃/s, a one-layer coating structure composed of α-Fe(Zn) phase was formed within 100 s, which is significantly shortened compared to the traditional furnace heating method.

Copyright
© 2023 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Download article (PDF)

Volume Title
Proceedings of the 6th International Conference on Advanced High Strength Steel and Press Hardening (ICHSU 2022)
Series
Atlantis Highlights in Material Sciences and Technology
Publication Date
2 March 2023
ISBN
978-94-6463-114-2
ISSN
2590-3217
DOI
10.2991/978-94-6463-114-2_30How to use a DOI?
Copyright
© 2023 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Cite this article

TY  - CONF
AU  - K. Wang
AU  - D. Y. Fang
AU  - B. Zhu
AU  - Y. L. Wang
AU  - Y. S. Zhang
AU  - Z. Z. Wang
AU  - W. Z. Dong
AU  - Q. Q. Lin
PY  - 2023
DA  - 2023/03/02
TI  - The Influence of Heating Rate on Phase Transformation of ZnFe Coating in Hot Stamping
BT  - Proceedings of the 6th International Conference on Advanced High Strength Steel and Press Hardening (ICHSU 2022)
PB  - Atlantis Press
SP  - 224
EP  - 229
SN  - 2590-3217
UR  - https://doi.org/10.2991/978-94-6463-114-2_30
DO  - 10.2991/978-94-6463-114-2_30
ID  - Wang2023
ER  -