Proceedings of the International Conference on Applied Science and Technology on Engineering Science 2023 (iCAST-ES 2023)

<Previous Article In Volume
Next Article In Volume>

Electropneumatic Systems Modification Analysis for Automatic Weighing with Cosmetics Industry Study Case

Authors
Abdul Syukur Alfauzi1, *, Dicky Mileno1, Farika Tono Putri1, Wahyu Isti Nugroho1, Timotius Anggit Kristiawan1, Ampala Khoryanton1, Yusuf Dewantoro Herlambang1
1Mechanical Engineering Department, Politeknik Negeri Semarang, Sarjana Terapan Teknik Mesin Produksi dan Perawatan, Semarang, Indonesia
*Corresponding author.
Corresponding Author
Abdul Syukur Alfauzi
Available Online 17 February 2024.
DOI
10.2991/978-94-6463-364-1_96How to use a DOI?
Keywords
electropneumatic; cycle time; automatic weighting
Abstract

PT ABC is company located in Semarang, Indonesia which engaged in cosmetics and castor oil production. One of main product of the company is face powder. According to observation there was a problem occur in the face powder production department. These problems are the results of inconsistent product weighing. The cause of the problem is the powder mass quality control process, where this process is a process of weighing the powder which is carried out conventionally by the operator, so the processing time for weighing the powder is not consistent and can cause a rejected product. This research aims to solve the problems that exist in the company. The solution to solving the problem given is to design a powder weighing process motor driven with an electro-pneumatic system. The results of this design are able to reduce the cycle time of weighing 40 gram powder by 1.07 seconds or 10.57% and reduce not good products by 1.16% for 40 gram powder products.

Copyright
© 2024 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Download article (PDF)

<Previous Article In Volume
Next Article In Volume>
Volume Title
Proceedings of the International Conference on Applied Science and Technology on Engineering Science 2023 (iCAST-ES 2023)
Series
Advances in Engineering Research
Publication Date
17 February 2024
ISBN
10.2991/978-94-6463-364-1_96
ISSN
2352-5401
DOI
10.2991/978-94-6463-364-1_96How to use a DOI?
Copyright
© 2024 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Cite this article

risenwbib
TY  - CONF
AU  - Abdul Syukur Alfauzi
AU  - Dicky Mileno
AU  - Farika Tono Putri
AU  - Wahyu Isti Nugroho
AU  - Timotius Anggit Kristiawan
AU  - Ampala Khoryanton
AU  - Yusuf Dewantoro Herlambang
PY  - 2024
DA  - 2024/02/17
TI  - Electropneumatic Systems Modification Analysis for Automatic Weighing with Cosmetics Industry Study Case
BT  - Proceedings of the International Conference on Applied Science and Technology on Engineering Science 2023 (iCAST-ES 2023)
PB  - Atlantis Press
SP  - 1058
EP  - 1067
SN  - 2352-5401
UR  - https://doi.org/10.2991/978-94-6463-364-1_96
DO  - 10.2991/978-94-6463-364-1_96
ID  - Alfauzi2024
ER  -