Proceedings of the International Conference on Applied Science and Technology on Engineering Science 2023 (iCAST-ES 2023)

<Previous Article In Volume
Next Article In Volume>

Performance Evaluation of Bottle Press Machine MQTT Data Acquisition

Authors
Heru Wijanarko1, *, Ahsani Abdun1, Diono Diono1, Prasaja Wikanta1, Hamdani Arif1, Asrizal Deri Futra1
1Department of Electrical Engineering, Politeknik Negeri Batam, Batam, Indonesia
*Corresponding author. Email: wijanarko@polibatam.ac.id
Corresponding Author
Heru Wijanarko
Available Online 17 February 2024.
DOI
10.2991/978-94-6463-364-1_99How to use a DOI?
Keywords
bottle press machine; data acquisition; MQTT; performance; QoS
Abstract

MQTT (Message Queuing Telemetry Transport) is a communication protocol designed for connecting devices in scenarios like machine-to-machine interactions and the Internet of Things (IoT). It excels in resource -constrained environments, slow data connections, and situations with data transmission delays. MQTT ensures data reliability using Quality of Service (QoS) levels, which are divided into three: QoS 0, QoS 1, and QoS 2, covering parameters like Throughput, Packet Loss, Delay, Round-Trip Time (RTT), and Retransmission. This research assessed MQTT’s performance in acquiring data from a bottle press machine, employing a PLC TM241CE40R controller developed by PBL (Project Based Learning) at Politeknik Negeri Batam. The results showed that QoS 2 achieved the highest throughput at 1.9 kbps, while QoS 0 had the lowest at 500 bps. Packet loss was highest at QoS 0 (0.81%) but absent in QoS 1 and 2. QoS 2 had the highest delay (approximately 330 ms), whereas QoS 0 had the lowest (around 50 ms). RTT closely matched delay, indicating a well-functioning broker. The 10-meter test exhibited the most retransmissions, revealing unstable internet connectivity, and QoS level 1 was deemed suitable for the Bottle Press Machine system.

Copyright
© 2024 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Download article (PDF)

<Previous Article In Volume
Next Article In Volume>
Volume Title
Proceedings of the International Conference on Applied Science and Technology on Engineering Science 2023 (iCAST-ES 2023)
Series
Advances in Engineering Research
Publication Date
17 February 2024
ISBN
978-94-6463-364-1
ISSN
2352-5401
DOI
10.2991/978-94-6463-364-1_99How to use a DOI?
Copyright
© 2024 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Cite this article

risenwbib
TY  - CONF
AU  - Heru Wijanarko
AU  - Ahsani Abdun
AU  - Diono Diono
AU  - Prasaja Wikanta
AU  - Hamdani Arif
AU  - Asrizal Deri Futra
PY  - 2024
DA  - 2024/02/17
TI  - Performance Evaluation of Bottle Press Machine MQTT Data Acquisition
BT  - Proceedings of the International Conference on Applied Science and Technology on Engineering Science 2023 (iCAST-ES 2023)
PB  - Atlantis Press
SP  - 1090
EP  - 1101
SN  - 2352-5401
UR  - https://doi.org/10.2991/978-94-6463-364-1_99
DO  - 10.2991/978-94-6463-364-1_99
ID  - Wijanarko2024
ER  -