Proceedings of the International Conference on Applied Science and Technology on Engineering Science 2023 (iCAST-ES 2023)

<Previous Article In Volume
Next Article In Volume>

Making Special Tools (SST) Valve Spring Removal on the Komatsu Pc130-7

Authors
Ismail Ramli1, *, Hamka Munir1
1Heavy Vehichle Study Program, Nunukan State Polytechnic, Nunukan, Indonesia
*Corresponding author. Email: Ismailramli001@gmail.com
Corresponding Author
Ismail Ramli
Available Online 17 February 2024.
DOI
10.2991/978-94-6463-364-1_15How to use a DOI?
Keywords
Komatsu; Tools; SST Valve; Spring; Removal
Abstract

In its development, heavy equipment engines produced today have four valves in each cylinder (two intake valves and two exhaust valves). With the increasing number of valves in each cylinder, the process of replacing and compacting the valves will require time and labor. Therefore, we need a tool to facilitate the release process. The formulation of the research problem is how to manufacture and use SST Valve Spring Removal. The purpose of this research is to find out how to manufacture and use SST Valve Spring Removal. The method used in this research is designing, making tools and testing the use of tools. The results of this study are the method of making SST Valve Spring Removal, namely design drawings, tools and materials, measurements, cutting, joining or welding, painting, painting and finishing. The way to use the SST Valve Spring Removal is to turn the screw rod handle so that the screw rod opens according to the size of the cylinder head, insert the tool into the cylinder head, then position the cylinder head with the retaining bolt from the tool. Turn the screw rod handle back so that the washer on the tool presses into the valve retainer position.

Copyright
© 2024 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Download article (PDF)

<Previous Article In Volume
Next Article In Volume>
Volume Title
Proceedings of the International Conference on Applied Science and Technology on Engineering Science 2023 (iCAST-ES 2023)
Series
Advances in Engineering Research
Publication Date
17 February 2024
ISBN
978-94-6463-364-1
ISSN
2352-5401
DOI
10.2991/978-94-6463-364-1_15How to use a DOI?
Copyright
© 2024 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Cite this article

risenwbib
TY  - CONF
AU  - Ismail Ramli
AU  - Hamka Munir
PY  - 2024
DA  - 2024/02/17
TI  - Making Special Tools (SST) Valve Spring Removal on the Komatsu Pc130-7
BT  - Proceedings of the International Conference on Applied Science and Technology on Engineering Science 2023 (iCAST-ES 2023)
PB  - Atlantis Press
SP  - 141
EP  - 148
SN  - 2352-5401
UR  - https://doi.org/10.2991/978-94-6463-364-1_15
DO  - 10.2991/978-94-6463-364-1_15
ID  - Ramli2024
ER  -