Proceedings of the 5th International Conference on Advanced Design and Manufacturing Engineering

Study on the Strength of the LIPEV Frame Based on ANSYS

Authors
Meishi Zhou, Tiezhu Zhang, Huaixianzhang Yin
Corresponding Author
Meishi Zhou
Available Online October 2015.
DOI
10.2991/icadme-15.2015.61How to use a DOI?
Keywords
load isolated pure electric vehicle(LIPEV); frame; ANSYS; strength analysis
Abstract

Aiming at the frame strength of the load isolated pure electric vehicle (LIPEV) which is modified by a micro truck, the three-dimensional model of the frame was established based on UG. The finite element analysis model of the frame was established based on ANSYS. The load before modified and the load after modified was carried out on the frame to solve the maximum equivalent stress of the frame. The value of the maximum equivalent stress with full load bending condition before modified is 2.57 Mpa while the value after modified is 2.57 MPa. The value of the maximum equivalent stress with floating condition before modified is 43.8 MPa while the value after modified is 43.7MPa. The results show that although the modification of the LIPEV has changed the load distribution of the frame, the frame can meet the strength requirement of the LIPEV frame, which can provide the theoretical basis for the modification of other electric vehicles.

Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 5th International Conference on Advanced Design and Manufacturing Engineering
Series
Advances in Engineering Research
Publication Date
October 2015
ISBN
978-94-6252-113-1
ISSN
2352-5401
DOI
10.2991/icadme-15.2015.61How to use a DOI?
Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Meishi Zhou
AU  - Tiezhu Zhang
AU  - Huaixianzhang Yin
PY  - 2015/10
DA  - 2015/10
TI  - Study on the Strength of the LIPEV Frame Based on ANSYS
BT  - Proceedings of the 5th International Conference on Advanced Design and Manufacturing Engineering
PB  - Atlantis Press
SP  - 307
EP  - 311
SN  - 2352-5401
UR  - https://doi.org/10.2991/icadme-15.2015.61
DO  - 10.2991/icadme-15.2015.61
ID  - Zhou2015/10
ER  -