Proceedings of the 4th Borobudur International Symposium on Science and Technology 2022 (BIS-STE 2022)

<Previous Article In Volume
Next Article In Volume>

PLC and HMI Application for Fuel Selector Switch on Bi-fuel Vehicles (Gasoline-LPG)

Authors
Muhammad Firdaus Jauhari1, 2, *, Rusmini Sri Maryati1, Raihan1, Saberani1, Norhafani3, Muhammad Arsyad3
1Department of Automotive Engineering Technology, Politeknik Negeri Banjarmasin, Banjarmasin, Indonesia
2Center of Research, Development, and Community Services, Politeknik Negeri Banjarmasin, Banjarmasin, Indonesia
3Department of Mechanical Engineering, Politeknik Negeri Banjarmasin, Banjarmasin, Indonesia
*Corresponding author. Email: firdaus.jauhari@poliban.ac.id
Corresponding Author
Muhammad Firdaus Jauhari
Available Online 9 November 2023.
DOI
10.2991/978-94-6463-284-2_2How to use a DOI?
Keywords
PLC application; HMI application; bi-fuel vehicles
Abstract

This design aims to develop a PLC and HMI application in the scope of automation in the automotive industry. The implementation of the fuel selector switch function was made as a simple project for a control system related to the use of fuel in a bi-fuel SI engine that operates with gasoline or LPG. The system development involves several stages, starting from creating a ladder diagram in the Outseal studio software. Then, writing a program, setting data according to the type of hardware PLC used, which is Mega V.2 Slim, including the appropriate com port number and baud rate, until uploading the ladder program. The next step is to set the appropriate baud rate on the Bluetooth module to synchronize communication with the Outseal PLC device using the Hercules SETUP Utility software. The final step is to create an HMI display on Android according to the desired design as a control feature, which will later be used to display the fuel selector switch on the vehicle. The testing results on the vehicle showed that the selector performance works well and no disturbance occurred.

Copyright
© 2023 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Download article (PDF)

<Previous Article In Volume
Next Article In Volume>
Volume Title
Proceedings of the 4th Borobudur International Symposium on Science and Technology 2022 (BIS-STE 2022)
Series
Advances in Engineering Research
Publication Date
9 November 2023
ISBN
10.2991/978-94-6463-284-2_2
ISSN
2352-5401
DOI
10.2991/978-94-6463-284-2_2How to use a DOI?
Copyright
© 2023 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Cite this article

risenwbib
TY  - CONF
AU  - Muhammad Firdaus Jauhari
AU  - Rusmini Sri Maryati
AU  - Raihan
AU  - Saberani
AU  - Norhafani
AU  - Muhammad Arsyad
PY  - 2023
DA  - 2023/11/09
TI  - PLC and HMI Application for Fuel Selector Switch on Bi-fuel Vehicles (Gasoline-LPG)
BT  - Proceedings of the 4th Borobudur International Symposium on Science and Technology 2022 (BIS-STE 2022)
PB  - Atlantis Press
SP  - 4
EP  - 11
SN  - 2352-5401
UR  - https://doi.org/10.2991/978-94-6463-284-2_2
DO  - 10.2991/978-94-6463-284-2_2
ID  - Jauhari2023
ER  -