P89 Non-invasive Blood Pressure Measurement System Using Three-axis Tactile Force Sensor
- DOI
- 10.2991/artres.k.191224.119How to use a DOI?
- Abstract
Blood pressure is most important parameter reflecting hemodynamic factors, however it is continuously variable in 24 hours. Here, we made a non-invasive and continuous BP measurement device using a three-axis tactile force sensor. All the data was collected every 2 min for the short-term experiment, and every 10 min for the long-term experiment. In addition, the effects on the BP measurement of external physical factors such as the tension to the radial artery on applying the device and wrist circumference were evaluated. A high correlation between the measured BP with the proposed system and with the cuff-based non-invasive blood pressure, and reproducibility, were demonstrated. All data satisfied the Association for the Advancement of Medical Instrumentation criteria. The external physical factors did not affect the measurement results. In addition to previous research indicating the high reliability of the arterial pulse waveforms, the present results have demonstrated the reliability of numerical BP values, and this implies that the three-axis force sensor can be used as a patient monitoring device.
- Copyright
- © 2019 Association for Research into Arterial Structure and Physiology. Publishing services by Atlantis Press International B.V.
- Open Access
- This is an open access article distributed under the CC BY-NC 4.0 license (http://creativecommons.org/licenses/by-nc/4.0/).
Cite this article
TY - JOUR AU - Hae-Young Lee PY - 2020 DA - 2020/02/17 TI - P89 Non-invasive Blood Pressure Measurement System Using Three-axis Tactile Force Sensor JO - Artery Research SP - S132 EP - S132 VL - 25 IS - Supplement 1 SN - 1876-4401 UR - https://doi.org/10.2991/artres.k.191224.119 DO - 10.2991/artres.k.191224.119 ID - Lee2020 ER -