Suppression of Roll Oscillation in Turning of Quadruped Robot by Asymmetric Amplification of Central Pattern Generator Output Waveform

Makoto Kitani; Ryo Asami; Noritaka Sato; Yoshifumi Morita; Tomofumi Fujiwara; Takahiro Endo; Fumitoshi Matsuno

doi:10.2991/jrnal.k.190828.001

<Previous Article In Issue

Next Article In Issue>

Volume 6, Issue 2, September 2019, Pages 79 - 83

Suppression of Roll Oscillation in Turning of Quadruped Robot by Asymmetric Amplification of Central Pattern Generator Output Waveform

Authors

Makoto Kitani¹, Ryo Asami¹, Noritaka Sato¹^{, *}, Yoshifumi Morita¹, Tomofumi Fujiwara², Takahiro Endo², Fumitoshi Matsuno²

¹Morita and Sato Laboratory, Electrical and Mechanical Engineering, Nagoya Institute of Technology, Gokiso-cho, Showa-ku, Nagoya, Aichi 466-8555, Japan

²Matsuno Laboratory, Kyoto University, Kyoto daigaku-Katsura, Nishikyo-ku, Kyoto 615-8530 Japan

^*Corresponding author. Email: sato.noritaka@nitech.ac.jp

Corresponding Author

Noritaka Sato

Received 3 November 2018, Accepted 20 November 2018, Available Online 10 September 2019.

DOI: 10.2991/jrnal.k.190828.001 How to use a DOI?
Keywords: CPG; quadruped robot; suppression of roll oscillation
Abstract: Quadruped robots experience excessive vibrations in the roll direction when turning by controlling their hip yaw joint. In the case of image-based teleoperation of the robot, the operator cannot aware the situation of the robot, due to excessive vibrations of the viewpoint of the image from the camera mounted on the robot. Especially, it is known that vibration in the roll direction is most likely to cause motion sickness. To overcome this problem, we proposed the asymmetric amplification of the output waveforms of central pattern generators. We implemented the proposed method on a robot in a dynamic simulator and verified the effectiveness of the proposed method, during the turning operation. As a result, we confirmed that the proposal method can suppress 43.7% vibration of the robot body in the roll direction and 7.4% vibration in the pitch direction compared with the conventional method.
Copyright: © 2019 The Authors. Published by Atlantis Press SARL.
Open Access: This is an open access article distributed under the CC BY-NC 4.0 license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)
View full text (HTML)

<Previous Article In Issue

Next Article In Issue>

Journal: Journal of Robotics, Networking and Artificial Life
Volume-Issue: 6 - 2
Pages: 79 - 83
Publication Date: 2019/09/10
ISSN (Online): 2352-6386
ISSN (Print): 2405-9021
DOI: 10.2991/jrnal.k.190828.001 How to use a DOI?
Open Access: This is an open access article distributed under the CC BY-NC 4.0 license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

ris enw bib

TY  - JOUR
AU  - Makoto Kitani
AU  - Ryo Asami
AU  - Noritaka Sato
AU  - Yoshifumi Morita
AU  - Tomofumi Fujiwara
AU  - Takahiro Endo
AU  - Fumitoshi Matsuno
PY  - 2019
DA  - 2019/09/10
TI  - Suppression of Roll Oscillation in Turning of Quadruped Robot by Asymmetric Amplification of Central Pattern Generator Output Waveform
JO  - Journal of Robotics, Networking and Artificial Life
SP  - 79
EP  - 83
VL  - 6
IS  - 2
SN  - 2352-6386
UR  - https://doi.org/10.2991/jrnal.k.190828.001
DO  - 10.2991/jrnal.k.190828.001
ID  - Kitani2019
ER  -

download .riscopy to clipboard